Printing on envelopes
Raise the output tray and remove any media from the input tray.
Insert up to 15 envelopes along the right side of the input tray, with the flaps facing up and
to the right, until they stop.
Open the small media guide by moving it 90 degrees clockwise from start to end position.
Press the button on top of the paper width guide and slide the guide to the right until it
stops at the edge of the envelopes.
Press the input tray lock and retract the tray until the small media guide stops at the edge
of the envelopes.
Lower the output tray.
Open the printer driver (see
“Printing a document”
iii Select the envelope size from the
iv Change any other desired print settings and click
Print your file.
, and then click
Select the envelope size.
iii Change any other desired print settings and click
If you are printing one or just a few envelopes, you can use the front manual feed slot. See
“Printing with the front or rear manual feed slot”
Avoid using envelopes that have clasps or windows; have thick, irregular, or curled edges;
are shiny or embossed; or are wrinkled, torn, or otherwise damaged.