Performing manual booklet printing
For Windows
1
Load the appropriate paper (see
“Loading media in the input tray”
).
2
Open the printer driver (see
“Printing a document”
).
3
Click the
Finishing
tab.
4
Select the
Print on Both Sides
check box, and ensure that
Use Auto-Duplex Unit
is
cleared.
5
Select a binding option in the
Booklet Layout is
drop-down list.
6
Do one of the following:
• To leave every other page of the booklet blank, select
Print on One Side
.
• To print on all pages in the booklet, clear the
Print on One Side
check box (if it is
selected).
7
Change any other desired print settings and click
OK
.
For Macintosh (Mac OS 9.1.x and 9.2.x)
1
Load the appropriate paper (see
“Loading media in the input tray”
).
2
Click
File
, and then click
.
3
Open the
Layout
panel.
4
Select the booklet option from the
Multiple Pages Per Sheet
drop-down list.
5
Select
Print Both Sides
, and then select
Manual
if the auto-duplex unit is installed.
6
Click the binding icon for Book (binding at the side) or Tablet (binding at the top).
7
Change any other desired print settings and click
OK
or
.
Manual duplexing is available when the printer is connected directly to your system and is not
shared on a network.
ENWW
4-31